HP ProOne 400 G1, Руководство по обслуживанию и ремонту

Страница: 65 / 192

Front bezel
Description Spare part number
Front bezel for use in models with a webcam 764958-001
Front bezel for use in models without a webcam 764959-001
The front bezel is located on the front of the computer and is secured to the main system bracket with
seven Torx screws. You can separate the bezel from the computer with most of the computer
assembled. You have to remove the rear cover, webcam, and bottom stand to remove the front bezel
from the computer.
To remove the front bezel:
1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 31 ).
2. Remove the rear cover (see Rear cover on page 34 ).
3. Remove the webcam (see Webcam module on page 48 ).
4. Remove the bottom stand (see Bottom stand on page 53 ).
5. Remove the seven Torx screws that secure the bezel to the main system bracket assembly.
6.
Lift the computer from the bezel.
To install the front bezel, reverse the removal procedures.
Front bezel 55