HP ProOne 400 G1 Скачать руководство пользователя

Страница: 170 / 192

Table 11-1

Numeric Codes and Text Messages (continued)

Control panel message

Description

Recommended action

304-Keyboard or System Unit Error

Keyboard failure.

Reconnect the keyboard with computer
turned off.

Ensure that none of the keys are
depressed.

Replace the keyboard.

Replace the system board.

501-Display Adapter Failure

Graphics display controller.

Reseat the graphics card (if applicable).

Clear CMOS. (See Appendix B,

Password Security and Resetting CMOS
on page 169

Verify monitor is attached and turned
on.

Replace the graphics card (if possible).

510-Flash Screen Image Corrupted

Flash Screen image has errors.

Reflash the system ROM with the latest BIOS
image.

511-CPU, CPUA, or CPUB Fan not Detected

CPU fan is not connected or may have
malfunctioned.

Reseat CPU fan.

Reseat fan cable.

Replace CPU fan.

512-Chassis, Rear Chassis, or Front Chassis
Fan not Detected

Chassis, rear chassis, or front chassis fan is
not connected or may have malfunctioned.

Reseat chassis, rear chassis, or front
chassis fan.

Reseat fan cable.

Replace chassis, rear chassis, or front
chassis fan.

513-Front Chassis fan not detected

Front chassis fan is not connected or may
have malfunctioned.

Reseat front chassis fan.

Reseat fan cable.

Replace front chassis fan.

514-CPU or Chassis Fan not Detected

CPU or chassis fan is not connected or may
have malfunctioned.

Reseat CPU or chassis fan.

Reseat fan cable.

Replace CPU or chassis fan.

515-Power Supply fan not detected

Power supply fan is not connected or may
have malfunctioned.

Reseat power supply fan.

Reseat fan cable.

Replace power supply fan.

660-Display cache is detected unreliable

Integrated graphics controller display cache
is not working properly and will be disabled.

Replace system board if minimal graphics
degrading is an issue.

912-Computer Cover Has Been Removed
Since Last System Startup

Computer cover was removed since last
system startup.

No action required.

160

Chapter 11 POST Error Messages

Содержание ProOne 400 G1

































































































































































































Результаты поиска

Содержание ProOne 400 G1

Отзывы:

Похожие инструкции для ProOne 400 G1

Бренды по названию

Популярные бренды

HP ProOne 400 G1, Руководство по обслуживанию и ремонту

Результаты поиска

Содержание ProOne 400 G1

Отзывы:

Похожие инструкции для ProOne 400 G1

Бренды по названию

Популярные бренды