HP ProLiant WS460c Gen9, Руководство по техническому обслуживанию и ремонту

Страница: 39 / 102

Removal and replacement procedures 39
o
Dual PCIe mezzanine pass-through bracket
To replace the component, reverse the removal procedure.
MXM graphics mezzanine module
The MXM board and the mezzanine-GPU module components shown in this procedure might look
slightly different than your product. The procedure is not impacted by the difference in appearance of
the hardware.
To remove the component:
1.
Power down the graphics server blade (on page 25 ).
2.
Remove the graphics server blade (" Remove the graphics blade " on page 26 ).
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the access panel (" Access panel (graphics server blade) " on page 31 ).
5.
Remove the mezzanine assembly (" Mezzanine assembly " on page 34 ).
6.
Remove the mezzanine GPU module from the mezzanine assembly (" Mezzanine options " on page
35 ).