![background image](http://html.mh-extra.com/html/hp/proliant-ws460c-gen9/proliant-ws460c-gen9_maintenance-and-service-manual_2175214055.webp)
Removal and replacement procedures 55
12.
Remove the front panel/drive cage assembly.
To replace the component, reverse the removal procedure.
Drive backplane
To remove the component:
1.
Power down the graphics server blade (on page
2.
Remove the graphics server blade ("
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the access panel ("
Access panel (graphics server blade)
5.
Remove all drives ("
6.
Remove all drive blanks ("
CAUTION:
Remove all drives and drive blanks before removing the drive backplane.
7.
Do one of the following:
o
Remove the storage controller ("
" on page
o
Disconnect the direct connect SATA cable ("
8.
Remove the internal USB drive, if installed. To locate the internal USB connector, see "System
board components (on page
)."
9.
Remove all DIMM baffles ("
10.
Remove the front panel/drive cage assembly ("
Содержание ProLiant WS460c Gen9
Страница 12: ...Customer self repair 12 ...
Страница 13: ...Customer self repair 13 ...
Страница 14: ...Customer self repair 14 ...