HP ProLiant SL160z - G6 Server Скачать руководство пользователя страница 67

Страница: 67 / 80

Diagnostic tools and Setup Utilities 67

•

View CPU type / CPU speed /CPU physical count information.

•

View System memory size.

•

View System serial number.

•

View MAC address for the embedded NIC.

•

Set Server Asset Tag.

•

Set system time and date.

•

Set boot features:

○

Enable or Disable POST Speed up.

○

Enable or Disable Bootup Num-Lock.

○

Set restore on AC power loss options, such as last state, power off, and power on.

○

If BIOS displays an error message, set POST F1 Prompt for selections, such as delayed,

enabled, or disabled.

Advanced Menu

Figure 56

Advanced menu of the BIOS Setup Utility 1

WARNING:

Incorrect settings may cause the server to malfunction. To correct the settings, press F9

key to restore the default settings.

•

CPU Configuration

–You can use this screen to select options for the CPU Configuration Settings.

Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys to

change the value of the selected option. A description of the selected item appears on the right

side of the screen. The settings are described on the following pages.

•

CPU Bridge Configuration

–You can use this screen to select options for the CPU Bridge Chipset

Configuration Settings. Use the up and down <Arrow> keys to select an item. A description of

the selected item appears on the right side of the screen. The settings are described on the

following pages.

•

SATA Configuration

–You can use this screen to select options for the S-ATA mode settings. Use

the up and down <Arrow> keys to select item. Use the <Plus> and <Minus> keys to change the

value of the selected option. The settings are described on the following pages.

All manuals and user guides at all-guides.com

Содержание ProLiant SL160z - G6 Server

















































































Результаты поиска

Содержание ProLiant SL160z - G6 Server

Отзывы:

Похожие инструкции для ProLiant SL160z - G6 Server

Бренды по названию

Популярные бренды

HP ProLiant SL160z - G6 Server, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant SL160z - G6 Server

Отзывы:

Похожие инструкции для ProLiant SL160z - G6 Server

Бренды по названию

Популярные бренды