HP ProLiant ML350 Gen9, Руководство пользователя

Страница: 65 / 171

Hardware options installation 65
o
For tower models, install the tower bezel (on page 31 ).
o
For rack models, install the security bezel (" Security bezel option " on page 48 ).
Installing a storage controller and FBWC module option
NOTE: HP Smart Array controllers are not supported in PCIe slot 5.
An HP Smart Array Controller Mini-SAS cable option is required to install an HP Smart Array Controller
option.
To install the component:
1.
Do one of the following:
o
For tower models, open and remove the tower bezel (" Remove the tower bezel " on page 30 ).
o
For rack models, if installed, remove the security bezel (" Remove the security bezel (optional) " on
page 30 ).
2.
Power down the server (on page 29 ).
3.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
4.
Do one of the following:
o
For tower models, place the server on a flat, level surface with the access panel facing up.
o
For rack models, extend the server from the rack (on page 33 ).
5.
Remove the access panel (on page 31 ).
6.
If you intend to use an FBWC module, install the module on the storage controller. Depending on the
controller model, the cable connector on the cache module might be facing up or down when the
module is installed on the controller board.