manualshive.com logo in svg

HP ProLiant DL560, Руководство пользователя, Страница: 91 / 136

Поделиться
Скачать
HP ProLiant DL560 Скачать руководство пользователя страница 91

 

Server Configuration and Utilities 

91 

 

For more information on drivers, refer to the 

Servers Troubleshooting Guide

 on 

the Documentation CD. 

 

USB Support 

HP provides both standard USB support and legacy USB support. Standard 
support is provided by the operating system through the appropriate USB device 
drivers. HP provides support for USB devices prior to the operating system 
loading through legacy USB support, which is enabled by default in the system 
ROM. HP hardware supports USB version 1.1 in the system ROM. 

Legacy USB support provides USB functionality in environments where USB 
support is normally not available. Specifically, HP provides legacy USB 
functionality at:  

• 
• 
• 
• 
• 

POST  

RBSU  

Diagnostics  

DOS  

Environments which do not support USB natively 

For more information on ProLiant USB support, refer to the HP website 
(

http://www.compaq.com/products/servers/platforms/usb-support.html

). 

 

Redundant ROM Support 

The server enables you to upgrade or configure the ROM safely with redundant 
ROM support. The server has a 4-MB ROM that acts as two, separate 2-MB 
ROMs. In the standard implementation, one side of the ROM contains the current 
ROM program version, while the other side of the ROM contains a backup 
version.  

NOTE:

  The server ships with the same version programmed on each 

side of the ROM. 

 

HP CONFIDENTIAL

 

File Name: 303212-1new.doc   Last Saved On: 11/4/02 10:51 AM

 

 

Содержание ProLiant DL560









































































































































Отзывы:

Нет отзывов