HP ProLiant DL560 Gen8 Скачать руководство пользователя | Manualshive

Страница: 78 / 102

background image

Software and configuration utilities 78

Redundant ROM support

The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server has
a single ROM that acts as two separate ROM images. In the standard implementation, one side of the ROM
contains the current ROM program version, while the other side of the ROM contains a backup version.

NOTE:

The server ships with the same version programmed on each side of the ROM.

Safety and security benefits

When you flash the system ROM, ROMPaq writes over the backup ROM and saves the current ROM as a
backup, enabling you to switch easily to the alternate ROM version if the new ROM becomes corrupted for
any reason. This feature protects the existing ROM version, even if you experience a power failure while

flashing the ROM.

Keeping the system current

Drivers

IMPORTANT:

Always perform a backup before installing or updating device drivers.

The server includes new hardware that may not have driver support on all OS installation media.
If you are installing an Intelligent Provisioning-supported OS, use Intelligent Provisioning (on page

70

) and its

Configure and Install feature to install the OS and latest supported drivers.
If you do not use Intelligent Provisioning to install an OS, drivers for some of the new hardware are required.

These drivers, as well as other option drivers, ROM images, and value-add software can be downloaded as
part of an SPP.
If you are installing drivers from SPP, be sure that you are using the latest SPP version that your server
supports. To verify that your server is using the latest supported version and for more information about SPP,
see the HP website (

http://www.hp.com/go/spp/download

).

To locate the drivers for a particular server, go to the HP website (

http://www.hp.com/go/hpsc

) and click

on

Drivers, Software & Firmware

. Then, enter your product name in the

Find an HP product

field and click

Go

.

Software and firmware

Software and firmware should be updated before using the server for the first time, unless any installed
software or components require an older version.
For system software and firmware updates, use one of the following sources:

•

Download the SPP ("

HP Service Pack for ProLiant

" on page

73

) from the HP Service Pack for ProLiant

download page (

http://www.hp.com/go/spp

).

•

Download individual drivers, firmware, or other systems software components from the server product
page in the HP Support Center (

http://www.hp.com/go/hpsc

).

«
...
76
77
78
79
80
...
»

Содержание ProLiant DL560 Gen8







































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant DL560 Gen8

x3800 - System - 8865

Бренд: IBM Страницы: 104

Virtual Services Platform 7000 Series

Бренд: Avaya Страницы: 103

AMD Opteron LS20 Type 8850

Бренд: IBM Страницы: 68

Бренд: Lucent Technologies Страницы: 85

FusionServer G5500 V6

Бренд: xFusion Digital Technologies Страницы: 100

Бренд: NEC Страницы: 10

Бренд: Xblue Networks Страницы: 2

Бренд: Acer Страницы: 20

Бренд: Acer Страницы: 20

AR360 F1 Series

Бренд: Acer Страницы: 20

Бренд: Acer Страницы: 18

AR380 F1 Series

Бренд: Acer Страницы: 17

Бренд: Acer Страницы: 134

Бренд: Acer Страницы: 23

AT350 F1 Series

Бренд: Acer Страницы: 23

Бренд: Acer Страницы: 160

Бренд: Acer Страницы: 95

AT350 F2 Series

Бренд: Acer Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды