HP ProLiant DL320e Скачать руководство пользователя страница 17

Страница: 17 / 204

Advanced Memory Protection

Advanced Memory Protection provides additional memory protection beyond ECC (error checking
and correcting), including:

Servers supported

Description

Option

G7 servers: All

Provides the largest memory capacity
to the OS.

Advanced ECC Support

(default)

Gen8 servers: All

G7 servers: All

Enables the system to automatically
map out a group of memory that is

Online Spare with Advanced ECC
Support

Gen8 servers: All

receiving excessive correctable
memory errors. This memory is
replaced by a spare group of memory.

G7 servers: Some models

Provides maximum protection against
uncorrectable memory errors that

Mirrored Memory with Advanced ECC
Support

Gen8 servers: Not an available option

would otherwise result in system
failure.

G7 servers: Some models

Provides maximum data protection by
enabling multiple-bit memory errors to

Lockstep Mode with Advanced ECC
Support

Gen8 servers (Intel): See

“Memory

Channel Mode” (page 130)

for this

be corrected in certain instances not
possible in Advanced ECC mode.

option, under the Advanced Options
Menu

For more information on Advanced Memory Protection, see the HP ProLiant Server Memory website
at

http://h18004.www1.hp.com/products/servers/technology/memoryprotection.html

System Options menu

Содержание ProLiant DL320e













































































































































































































Результаты поиска

Содержание ProLiant DL320e

Отзывы:

HP ProLiant DL320e, Руководство пользователя, Страница: 17 / 204

Результаты поиска

Содержание ProLiant DL320e

Отзывы: