HP ProLiant DL320e Скачать руководство пользователя страница 144 | Manualshive

Страница: 144 / 204

HP ProLiant DL320e Скачать руководство пользователя страница 144

3 RBSU menu-driven interface (G6 and earlier servers)

RBSU main menu

NOTE:

Menu options may differ from those in this document, depending on the server model.

On the left-hand side of the screen, the RBSU menu lists configuration settings to view or modify.
On the right-hand side of the screen, a window displays basic server information, including the
server model, serial number, BIOS version, backup BIOS version, memory installed, and processors
installed.

NOTE:

To see online help, highlight the selection and press

F1

. All menus are in English only.

Each RBSU sub-menu and its options are described in this chapter.

System Options menu

The

System Options

menu enables basic I/O server configuration with the following options:

•

“Embedded Serial Port A” (page 145)

•

“Embedded Serial Port B” (page 146)

•

“Virtual Serial Port” (page 147)

•

“Optional LPT Mode Support” (page 147)

•

“Optional LPT Mode Support” (page 147)

•

“Integrated Diskette Controller” (page 147)

•

“NUMLOCK Power-On State” (page 147)

•

“Embedded NICs” (page 148)

•

“Diskette Write Control” (page 148)

•

“Diskette Boot Control” (page 148)

•

“Advanced Memory Protection” (page 149)

144 RBSU menu-driven interface (G6 and earlier servers)

«
...
142
143
144
145
146
...
»

Содержание ProLiant DL320e













































































































































































































Отзывы:

Нет отзывов