Configuring and Deploying Server Blades
1.
Connect the I/O cable to the server blade (1).
2.
Connect the video connector to a monitor (2).
3.
Connect a USB mouse to the USB connector (3).
4.
Connect a USB keyboard to the USB connector (4).
Figure 2-5: Directly accessing a configured server blade
Directly Accessing a Server Blade to Configure a Server Blade or Load Software
Updates
Use the following setup to configure a server blade using a SmartStart CD or to load
software updates or patches using the CD-ROM:
CAUTION: Rear iLO connector performance degrades when the I/O cable or the
diagnostic cable is in use, even when the iLO connector on the cable is not in use.
HP ProLiant BL40p Server Blade Setup and Installation Guide
2-9
HP CONFIDENTIAL
Writer: Amy Clute File Name: c-ch2 Configuring and Deploying Server Blades.doc
Codename: Black Ice Part Number: 307153-002 Last Saved On: 11/11/03 2:31 PM