HP ProCurve 1810G Скачать руководство пользователя страница 51

Страница: 51 / 80

6-3

Trunks

Trunk Membership

Use this page to specify the switch ports that are included in each trunk. To access the page, click

Trunk > Trunk Membership

in the navigation pane.

As shown in the example configuration in

Figure 6-2

, ports 2 and 3 have been added to Trunk1.

Figure 6-2. Trunk Membership Page

N o t e

For trunks that are enabled with Static capability, the LACP option is not available.

Table 6-2. Trunk Membership Fields

■

Click

Apply

to save any changes to the currently selected trunk. The changes take effect

immediately. Use the

Maintenance > Save Configuration

page to have the settings to remain in

effect after a reboot.

To view trunk status information, click

Status > Trunk Status

in the navigation pane.

Field

Description

Trunk ID

Select a trunk to configure its member ports.

Port Trunk

For each port that you want to be a member of the selected trunk, click the

Port Trunk

box to display an

To remove a port from a trunk, click again to leave the box blank.

Note:

• Ports that are configured for Port Mirroring (either as a destination or a source port) cannot be

configured as trunk ports and are greyed-out.

• Ports added to a trunk lose their port VLAN memberships and are assigned to the trunk group VLAN

membership. Ports removed from a Trunk automatically become members of the default VLAN.

• All the ports participating in a trunk must have the same speed.

LACP

This field displays only for dynamically configured trunks; it does not display for trunks that are enabled
with Static capability.
Click the

LACP

box to configure whether each port sends LACPDUs (an

displays). When the box is

blank, the port can only be statically configured as a member of the trunk.

Содержание ProCurve 1810G

















































































Результаты поиска

Содержание ProCurve 1810G

Отзывы:

Похожие инструкции для ProCurve 1810G

Бренды по названию

Популярные бренды

HP ProCurve 1810G, Руководство по управлению и настройке

Результаты поиска

Содержание ProCurve 1810G

Отзывы:

Похожие инструкции для ProCurve 1810G

Бренды по названию

Популярные бренды