HP ProCurve 1810G Скачать руководство пользователя страница 20

Страница: 20 / 80

2-4

Status Pages

Port Summary

Table 2-1. Port Summary Fields

■

Click

Clear

to reset all statistics to their initial values.

■

Click the

Refresh

link above the page to re-display the page with the latest port information.

For instructions on configuring port settings, see

“Port Configuration” on page 4-1

Field

Description

Port Summary

Interface

Displays list of physical and logical interfaces supported or configured on a particular
platform.

Physical Type

Displays whether the port is operating in copper mode or fiber mode.

Port Status

The physical status (Up or Down) of the port.

AutoNeg Status

Displays whether Auto negotiation is enabled or disabled on the port.

Link Speed

The physical speed at which the port is operating.

MTU

The Maximum Transmission Unit (MTU), also referred to as Max Frame size acceptable
on the specified port.

Port Statistics and Trunk Statistics

Note

: The following statistics are collected for both individual port and for trunks.

Interface

The list of physical and logical interfaces supported on that platform.

Received Packets w/o Error

The packet count received on the port with out any packet errors.

Received Packets with Error

The packet count received on the port with errors.

Broadcast Received
Packets

The packet count for Broadcast packets received on the port.

Transmitted Packets w/o
Errors

The packets transmitted out of that port with out any packet errors.

Transmitted Packets with
Errors

The number of packets transmitted out of the port with packet errors.

Collisions

The count of collided packets.

Transmitted Pause Frames

(For ports only) The number of Ethernet pause frames transmitted.

Received Pause Frames

(For ports only) The number of Ethernet pause frames received.

Содержание ProCurve 1810G

















































































Результаты поиска

Содержание ProCurve 1810G

Отзывы:

Похожие инструкции для ProCurve 1810G

Бренды по названию

Популярные бренды

HP ProCurve 1810G, Руководство по управлению и настройке

Результаты поиска

Содержание ProCurve 1810G

Отзывы:

Похожие инструкции для ProCurve 1810G

Бренды по названию

Популярные бренды