HP ProCurve 1600M, Руководство по управлению и настройке

Страница: 368 / 690

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
ProCurve(config)# show snmp-server
SNMP Communities
Community Name MIB View Write Access
---------------- -------- ----------- -
public Manager Unrestricted
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Send Authentication Traps [No] : No
Address Community Events Sent in Trap
---------------------- ---------------- ------------------
10.28.227.200 public All
Figure 14-10. Example of Show SNMP-Server with Link-Change Traps Enabled
Configuring the Source IP Address for SNMP Requests
and Traps
SNMP-Server Source IP Address Commands Page
show snmp-server 14-26
snmp-server response-source [dst-ip-of­
request | IP-ADDR | loopback<0-7>]
14-25
snmp-server trap-source [ IP-ADDR |
loopback<0-7>]
14-25
The switch uses the interface IP address as the source IP address in the IP
header when sending a response to SNMP requests. For multi-netted
interfaces, the source IP address is the outgoing interface IP address, which
may be different from the IP address in the destination field of the IP header
of the request. It is sometimes desirable for security reasons to send SNMP
replies from the same IP address as the one on which the corresponding SNMP
14-24