HP ProCurve 1600M, Руководство по управлению и настройке

Страница: 130 / 690

Switch Memory and Configuration
Using Primary and Secondary Flash Image Options
tures. For example, suppose you have just downloaded a software upgrade
that includes new features that are not supported in the software you used to
create the current startup-config file. In this case, the software simply assigns
factory-default values to the parameters controlling the new features. Simi­
larly, If you create a startup-config file while using a version “Y” of the switch
software, and then reboot the switch with an earlier software version “X” that
does not include all of the features found in “Y”, the software simply ignores
the parameters for any features that it does not support.
Scheduled Reload. If no parameters are entered after the reload command,
an immediate reboot is executed. The reload at and reload after command
information is not saved across reboots. If the switch is rebooted before a
scheduled reload command is executed, the command is effectively cancelled.
When entering a
reload at or reload after command, a prompt will appear to
confirm the command before it can be processed by the switch. For the reload
at command, if mm/dd/yy are left blank, the current day is assumed.
The scheduled reload feature removes the requirement to physically reboot
the switch at inconvenient times (for example, at 1:00 in the morning). Instead,
a
reload at 1:00 mm/dd command can be executed (where
mm/dd
is the date
the switch is scheduled to reboot).
Boot and Reload Command Comparison
The switch offers reboot options through the
boot
and
reload
commands, plus
the options inherent in a dual-flash image system. Generally, using
boot
provides more comprehensive self-testing; using
reload
gives you a faster
reboot time.
6-20