HP ProCurve 1600M, Руководство по управлению и настройке

Страница: 362 / 690

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
timeout < value >
Specifies how long the switch waits for a response from
the target before it retransmits the packet. (Default:
1500
) Range: 0-2147483647
max-msg-size <size> Default: 1472
Specifies the maximum number of bytes a message to
this target can contain.
taglist <tag-params>
Set the list of values used to select this entry from
snmpNotifyTable
.
Note : You are only allowed up to 103 characters for this value.
[no] snmpv3 params <params_name> user <user_name>
Adds or deletes a user parameter for use with target
address. The
params_name must match the parms_name
in the
targetaddress
command. The
user_name
should be
a user from the User Table. For more information on
users refer to “SNMPv3 Users” on page 14-7.
A complete params command must also have a sec-model
and
msg-processing
entry.
< sec-model < ver1 | ver2c | ver3 >
This establishes the security model to use for messages
passed to the
targetaddress . If you use ver3 then
msg-processing
must also be
ver3
.
< msg-processing < ver1 | ver2c | ver3 > [noaut | auth | priv]
Establishes the
msg-processing
algorithm for messages
passed to the target address. If ver3 is used and sec­
model
is
ver3
then you must select a security services
level ( noauth , auth , or priv ).
14-18