HP Pavilion t100 - Desktop PC, Руководство по техническому обслуживанию и ремонту

Страница: 123 / 214

Table C-1 Numeric Codes and Text Messages (continued)
Control panel message Description Recommended action
513-Front Chassis Fan not detected Front chassis fan is not connected or may
have malfunctioned. 1. Reseat front chassis fan.
2. Reseat fan cable.
3.
Replace front chassis fan.
515-Power Supply Fan not detected Power supply fan is not connected or may
have malfunctioned. 1. Reseat power supply fan.
2. Reseat fan cable.
3. Replace power supply fan.
605-Diskette Drive Type Error Mismatch in drive type. 1. Disconnect any other diskette controller
devices (tape drives).
2.
Clear CMOS. (See Appendix B,
Password Security and Resetting CMOS
on page 121
.)
660-Display cache is detected unreliable Integrated graphics controller display cache
is not working properly and will be disabled. Replace system board if minimal graphics
degrading is an issue.
912-Computer Cover Has Been Removed
Since Last System Startup Computer cover was removed since last
system startup. No action required.
917-Front Audio Not Connected Front audio harness has been detached or
unseated from motherboard. Reconnect or replace front audio harness.
921-Front USB 1 Not Connected Front USB harness has been detached or
unseated from motherboard. Reconnect or replace front USB harness.
922-Front USB 1 Not Connected Front USB harness has been detached or
unseated from motherboard. Reconnect or replace front USB harness.
921-Device in PCI Express slot failed to
initialize There is an incompatibility/problem with this
device and the system or PCI Express Link
could not be retrained to an x1. Try rebooting the system. If the error
reoccurs, the device may not work with this
system
1151-Serial Port A Address Conflict Detected Both external and internal serial ports are
assigned to COM1.
1. Remove any serial port expansion
cards.
2. Clear CMOS. (See Appendix B,
Password Security and Resetting CMOS
on page 121
.)
3. Reconfigure card resources and/or run
Computer Setup.
1152-Serial Port B Address Conflict Detected Both external and internal serial ports are
assigned to COM2.
1. Remove any serial port expansion
cards.
2. Clear CMOS. (See Appendix B,
Password Security and Resetting CMOS
on page 121
.)
3. Reconfigure card resources and/or run
Computer Setup.
POST Numeric Codes and Text Messages
113