HP Open View, Руководство по установке и обслуживанию

Страница: 64 / 184

Configuring Hosts and Storage Arrays
64 Continuous Access Storage Appliance Installation and Maintenance Guide
10. Open Disk Administrator on the host. Verify that the additional disk space appears at the
end of the LUN you want to expand.
11. Open the WinZip file that contains the
diskpart
utility. Select the utility and click
Actions > Install to install the utility on the host.
12. Open a command prompt window on the host.
13. Go to the directory in which you installed the
diskpart
utility. If you used the default
directory, go to
c:\program files\resource kit
.
14. Enter the following command:
diskpart.exe
15. At the
diskpart>
prompt, enter:
List Volume
16. To select the LUN you want to expand, enter:
select volume #
Note: You can run the
List Volume
command again to ensure you have selected the
correct LUN.
17. Enter the following command:
Extend
The following message is displayed:
Diskpart Successfully Extended the Volume
18. Open Disk Administrator on the host. Verify that the LUN is a Basic disk and reflects the
newly expanded size.