manualshive.com logo in svg

HP nld, Руководство пользователя

Бесплатный пользовательский мануал HP nld доступен для скачивания на manualshive.com. Этот мануал поможет вам лучше понять ваше устройство и использовать его по максимуму. Скачайте свой экземпляр сейчас и разверните все возможности HP nld.

Поделиться
Скачать
background image

nld Diagnostic Messages

nld and noft Manual — 520384-003

10 -28

Fatal Errors

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

This is an internal error. Please contact your service provider.

**** ERROR **** [1093]:
You specified the -srl_name flag in the wrong circumstances; 
-srl_name may only be specified when you specify -srl without 
-r, or when you specify -keep_srl_options.

**** ERROR **** [1094]:
You specified the -prev flag in the wrong circumstances; 
-prev may only be specified when you specify -srl without -r.

**** ERROR **** [1095]:
You specified the -srl flag, but not the -d flag.  When you 
specify -srl, it is always necessary to also specify -d.

**** ERROR **** [1096]:
When you specify -srl, you must also specify -srl_name, 
unless the SRL name will be obtained from the file specified 
in a -prev flag or in a -use_srl_options flag.

**** ERROR **** [1097]:
The -no_data_rearrange flag is not allowed with the -prev 
flag; if you need to specify -no_data_rearrange, you must 
remove the -prev flag and provide all the flags normally 
required for the -srl flag when -prev is not used.

**** ERROR **** [1098]:
The various 'slack' flags are not allowed with the -prev 
flag; when you use the -prev flag, the maximum sizes of the 
text and data segments are inherited from the previous 
version of the SRL.

Содержание nld











































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для nld

NEC Versa 2730M Manual preview
Versa 2730M
Бренд: NEC Страницы: 4
MAGIX VIDEO EASY3hd Manual preview
VIDEO EASY3hd
Бренд: MAGIX Страницы: 88
Cisco Unity Express 8.0 Voice-Mail System User Manual preview
Unity Express 8.0 Voice-Mail System
Бренд: Cisco Страницы: 50
Cisco TELEPRESENCE MANAGEMENT SUITE PROVISIONING Troubleshooting Manual preview
TELEPRESENCE MANAGEMENT SUITE PROVISIONING
Бренд: Cisco Страницы: 16
Cisco Unified MeetingPlace H.323/SIP Administrator'S Manual preview
Unified MeetingPlace H.323/SIP
Бренд: Cisco Страницы: 54
Cisco PVDM2 24DM - Digital Modem Module User Manual preview
PVDM2 24DM - Digital Modem Module
Бренд: Cisco Страницы: 48
Cisco TELEPRESENCE MANAGEMENT SUITE SECURE SERVER Configuration Manual preview
TELEPRESENCE MANAGEMENT SUITE SECURE SERVER
Бренд: Cisco Страницы: 34
Cisco SGACL Configuration Manual preview
SGACL
Бренд: Cisco Страницы: 8
Cisco Unified Videoconferencing Manager Installation Manual preview
Unified Videoconferencing Manager
Бренд: Cisco Страницы: 22
Cisco SMART BUSINESS COMMUNICATIONS SYSTEM Feature Reference preview
SMART BUSINESS COMMUNICATIONS SYSTEM
Бренд: Cisco Страницы: 27
Cisco MDS 9222i - Multiservice Modular Fabric Switch Release Note preview
MDS 9222i - Multiservice Modular Fabric Switch
Бренд: Cisco Страницы: 40
Cisco MCS 7825 Series Installation Manual preview
MCS 7825 Series
Бренд: Cisco Страницы: 20
Cisco Surveillance Media Server Installing And Upgrading preview
Surveillance Media Server
Бренд: Cisco Страницы: 14
Cisco OL-5490-01 User Manual preview
OL-5490-01
Бренд: Cisco Страницы: 92
Cisco TelePresence Movi 4.1 Administrator'S Manual preview
TelePresence Movi 4.1
Бренд: Cisco Страницы: 29
Cisco MeetingPlace Video Integration Administrator'S Manual preview
MeetingPlace Video Integration
Бренд: Cisco Страницы: 84
Cisco SMTP Administration Manual preview
SMTP
Бренд: Cisco Страницы: 48
Cisco UC520-8U-4FXO-K9 Getting Started preview
UC520-8U-4FXO-K9
Бренд: Cisco Страницы: 54

Бренды по названию

Популярные бренды

Загрузить еще бренды