HP nld Скачать руководство пользователя

Страница: 280 / 330

ar Diagnostic Messages

nld and noft Manual — 520384-003

12- 2

Cause.

When building an archive in the Guardian environment,

encountered a File

System error identified by the number

errnum

when processing the specified member.

The archive should be intact except for the member that caused the error.

Recovery.

Correct the error condition and add the member to the archive using the

-r

option, also specifying

if the position of the member is relevant.

Cause.

When building an archive in the Guardian environment, the maximum size for

a single member is approximately 128,073,728 bytes.

Recovery.

Rebuild the archive, excluding the file that is too large.

Cause.

When building an archive in the Guardian environment, each member file

must be an odd, unstructured disk file. In particular, Edit-format (code 101) files are not
allowed in archives.

Recovery.

Rebuild the archive, excluding files that are of invalid types.

Cause.

An I/O error occurred when the specified archive was being closed prior to

constructing the archive symbol table.

Recovery.

Correct the condition that caused the I/O error, then build the symbol table

by using

with the

-ts

options.

Cause.

An error occurred when

attempted to open the specified archive.

Recovery.

Identify the error and remedy the situation, then rebuild the archive.

ar: member: encountered error errnum.

ar: member: file too large.

ar: member: invalid file type.

archive, cannot close to reposition for symbol table.

archive, cannot open.

Содержание nld











































































































































































































































































































































Результаты поиска

Содержание nld

Отзывы:

Похожие инструкции для nld

Бренды по названию

Популярные бренды

HP nld, Руководство пользователя

Результаты поиска

Содержание nld

Отзывы:

Похожие инструкции для nld

Бренды по названию

Популярные бренды