HP nld Скачать руководство пользователя страница 282

Страница: 282 / 330

ar Diagnostic Messages

nld and noft Manual — 520384-003

12- 4

Cause.

In the Guardian environment, a file specified as an existing archive must be an

odd, unstructured file having file code 700.

Recovery.

archive

refers to a file that is not currently in archive format, delete that

file and reenter the

command. If

archive

refers to an archive that was built by the

utility in another environment, check the file code of that file using the FUP utility; if

the file code is not 700, change it using FUP.

Cause.

cannot obtain additional memory space for the symbol table. The archive

file, if created, will not be usable by

nld

Recovery.

Retry the command when there are fewer active processes in the system

or break up a large archive file into smaller archive files.

Cause.

cannot obtain additional memory space for the symbol table. The archive

file, if created, will not be usable by

nld

Recovery.

Break the archive into several smaller archives.

Cause.

detected inconsistencies in the object file member and cannot finish its

operation. The archive symbol table is unusable by

nld

Recovery.

Either remove the object file member from the archive file or obtain a valid

copy of the object file and repeat the

operation.

Cause.

An error occurred during the operation; for example, a member file cannot be

found. The archive symbol table contained in the archive may have been corrupted or
may not contain up-to-date information required by

nld

for resolving external

references.

Recovery.

Identify the source of the error and remedy the situation so that the archive

operation can be finished normally. The

-s

option can also be used to restore or

regenerate the symbol table.

archive, not a valid archive file.

cannot malloc space for symbol table.

cannot realloc space.

corrupted object file filename.

error during operation, archive archive may not contain
correct symbol table usable by the binder/nld.

Содержание nld











































































































































































































































































































































Результаты поиска

Содержание nld

Отзывы:

Бренды по названию

Популярные бренды

HP nld, Руководство пользователя

Результаты поиска

Содержание nld

Отзывы:

Бренды по названию

Популярные бренды