HP nld Скачать руководство пользователя страница 275

Страница: 275 / 330

noft Diagnostic Messages

nld and noft Manual — 520384-003

11 -33

Syntax Errors

Cause.

One of the following:

•

The object file cannot be found.

•

The object file cannot be opened because it is corrupted.

•

The object file is already open for writing.

Recovery.

Ensure that the object file name is spelled correctly and is in the current

directory. Ensure that the object file is not in use. Rebuild the object file.

Cause.

You do not have write privileges for the current directory or subvolume.

Recovery.

Ensure that you have write access to the directory or subvolume and that

nontext files do not exist with the same name.

Cause.

SET CASE

expects

OFF

(see

SET

on page 5-42).

Recovery.

Supply one of the these two arguments to the

SET CASE

command.

Cause.

This error occurs for some of the undocumented commands. It indicates that

the scope could not be displayed as a string. This might mean that symbol table
information is missing.

Recovery.

Recompile the module with symbols.

Cause.

Stated in message.

Recovery.

Use the

LISTPROC *

command to see the available procedure names

(see

LISTPROC or LP

on page 5-27).

*** SYNTAX ERROR *** [3053]:
Unable to open object file filename, command ignored.

*** SYNTAX ERROR *** [3054]:
Unable to open/create filename filename, command ignored.

*** SYNTAX ERROR *** [3056]:
Wrong parameter to CASE, command ignored.

*** SYNTAX ERROR *** [3057]:
Procedure name not available, procedure-name.

*** SYNTAX ERROR *** [3058]:
Procedure name not found, check procedure descriptor table.

Содержание nld











































































































































































































































































































































Результаты поиска

Содержание nld

Отзывы:

Бренды по названию

Популярные бренды

HP nld, Руководство пользователя

Результаты поиска

Содержание nld

Отзывы:

Бренды по названию

Популярные бренды