HP Neoware m100, Руководство пользователя

Страница: 165 / 256

Advanced Tasks
Images 155
8
Click
OK
to apply the task to the device immediately.
When the HP Management Agent on the client receives the task,
the client will display a warning message indicating that the
device will reboot in 15 seconds.
The client will shutdown then start-up in DOS mode and run the
clone utility which copies the contents of the flash storage to an
.img file on the FTP Repository. The last line on the client dis-
play will indicate progress in percentage completed. Note that
this may take several minutes.
The client will reboot after cloning has completed and enter
Maintenance Mode. DO NOT turn off the device during this pro-
cedure! The client will then reboot again.
The
Tasks
pane in the Management Console will continue to
indicate that the task is processing. The cloned image is being
compressed.
When the task has finished, a new template will appear in the
Task Templates
pane with the name you specified in step 5 (the
result template).
You can now use this template to apply the cloned XPe image to
other XPe devices of the same model type and identical flash
storage size just by dragging and dropping it on the device(s) in
the
Device Tree
.
You can view information about the XPe image associated with
the template by double-clicking on the name of the template to
display the
Template Editor
dialog. This will display the name
of the image and the FTP Repository where it is stored, its OS
build number, original size, compressed size, and checksum.