HP Neoware m100 Скачать руководство пользователя страница 23

Страница: 23 / 256

Installing HP Device Manager

System Requirements

Management
Gateway

The

Management Gateway

may be installed on multiple machines.

However, only one Gateway should be present on a subnet. It has the
following minimum system requirements:

•

Operating System

Windows 2000 Professional (SP4)
Windows 2000 Server (SP4)
Windows 2003 Server

•

Third-party Software

N/A

•

Hardware

Pentium-III or greater
512 MB RAM
512 MB free disk space.

Management Agent

The

Management Agent

should be installed on each device that will

be managed by the system. It has the following minimum system
requirements:

•

Operating System

NeoLinux 4.0.1
Neoware CE 8.1
Neoware XP embedded 1.4.2 or later
NeoLinux 3

•

Hardware

Thin-client device supporting one of the operating systems listed
above.
2 MB free disk space.

Third Party
Software

The following FTP Servers are recommended for use with HP
Device Manager:

•

FTP Server

Microsoft Internet Information Server (IIS) 5.0
Rhinosoft Serv-U FTP Server 4.0
SCO UNIX OpenServer FTP Server 5.0.4 or 5.0.6.

Содержание Neoware m100

































































































































































































































































Результаты поиска

Содержание Neoware m100

Отзывы:

HP Neoware m100, Руководство пользователя, Страница: 23 / 256

Результаты поиска

Содержание Neoware m100

Отзывы: