HP Neoware m100 Скачать руководство пользователя страница 34

Страница: 34 / 256

Installing HP Device Manager

Installing HP Device Manager

Click

Next

to display the

Gateway Configuration

dialog.

The

Management Server Address

is the address for the Manage-

ment Server that the Management Gateway will report to.

The

Local NIC

selects which NIC the gateway will receive agent

reports on. If there is only one NIC for the system, this field can
be left blank.

The

Start PXE service when Gateway is started

setting deter-

mines whether the PXE service will be started along with the
Management Gateway. The PXE service is always installed
along with the Gateway, but can be controlled independently of
the Gateway (by changing this setting to

) if required. If this

is set to

YES

, when the Gateway is stopped, the PXE service

will also stop; when the Gateway is started, the PXE service will
also start.

Содержание Neoware m100

































































































































































































































































Результаты поиска

Содержание Neoware m100

Отзывы:

HP Neoware m100, Руководство пользователя, Страница: 34 / 256

Результаты поиска

Содержание Neoware m100

Отзывы: