HP Neoware m100 Скачать руководство пользователя страница 60

Страница: 60 / 256

Getting Started

Client Discovery

Modify the gateway IP address in the second line. Please take
the format of the following illustration as an example (where

192.168.0.106

is the IP address of the gateway).

Save your modifications and close this file.

When rebooted, the agent will search for the gateway according to
your specified IP address in the

Agent.cfg

file.

Note 1:

The agents in the

NAT

environment must be configured as

described above.

Note 2:

As for the agents that have successfully finished one task at

least, the IP address of the gateway has been added into the original
format of the

Agent.cfg

file on these agents.

Hence you do not need

to manually configure these agents again.

Содержание Neoware m100

































































































































































































































































Результаты поиска

Содержание Neoware m100

Отзывы:

HP Neoware m100, Руководство пользователя, Страница: 60 / 256

Результаты поиска

Содержание Neoware m100

Отзывы: