HP J9146A - ProCurve Switch 2910al-24G-PoE, Руководство по установке и началу работы

Страница: 63 / 116

3-5
Getting Started With Switch Configuration
Using the IP Address for Remote Switch Management
Ge
tti
n
g
S
ta
rte
d
With
Sw
itc
h
Co
n
fig
u
ra
tio
n
Using the IP Address for Remote Switch
Management
With your switch, you can use the switch’s IP address to manage the switch
from any PC that is on the same subnet as the switch. You can use either a
Telnet session or a standard web browser to manage the switch.
Starting a Telnet Session
To access the switch through a Telnet session, follow these steps:
1. Make sure the switch is configured with an IP address and that the switch
is reachable from the PC that is running the Telnet session (for example,
by using a Ping command to the switch’s IP address).
2. Start the Telnet program on a PC that is on the same subnet as the switch
and connect to the switch’s IP address.
3. You will see the copyright page and the message “Press any key to
continue”. Press a key, and you will then see the switch console command
(CLI) prompt, for example:
ProCurve Switch 2910al-48G#
Enter
help
or
?
to see a list of commands that can be executed at the
prompt. Entering any command followed by
help
provides more detailed
context help information about the command. Entering any command
followed by
?
displays a list of options that are available at that point in
the command entry.
Starting a Web Browser Session
Your Switch can be managed through a graphical interface that you can access
from any PC or workstation on the network by running your web browser and
typing in the switch’s IP address as the URL. No additional software installa-
tion is required to make this interface available; it is included in the switch’s
onboard software.