1-8
Introducing the Switch
Front of the Switch
In
tr
odu
ci
ng
t
h
e
S
w
it
c
h
LED Mode Select Button and Indicator LEDs
The operation of the Mode LED is controlled by the LED Mode select button,
and the current setting is indicated by the LED Mode indicator LEDs near the
button. Press the button to step from one view mode to the next.
RPS Status
(green)
On
Flashing
Off
Normal operation. RPS is connected and operating correctly. RPS could be
powering the unit.
RPS is connected but has experienced a fault.
RPS is not connected or is not powered on.
EPS Status
(green)
On
Flashing
Off
Connected to an External Power Supply, and receiving power.
The External Power Supply is connected but has experienced a fault or is
unplugged.
The switch is not connected to an EPS.
Fan Status
(green)
On
Flashing
1
Normal operation, all fans are ok.
One of the unit’s fans has failed. The switch Fault LED will be flashing
simultaneously.
PoE Status
On
Off
Flashing
1
Flashing
2
If any ports are supplying PoE power.
If no ports are supplying PoE power. Should be off only during the boot process.
If any port has a internal hardware failure
If any port is denied PoE power or detecting an external PD fault
Temp
(green/Orange)
Off
Switch temperature is normal.
Flashing
1
An over temperature condition has been detected.
Auxiliary (green/
orange) For more
information see
the Management
and Configuration
Guide for your
switch.
Flashing
green
1
Indicates the switch is processing a USB command file.
On green
The switch has finished processing the USB command file successfully.
Flashing
orange
2
Indicates an error condition.
Off
Indicates that no USB device has been inserted, or that the inserted USB device
cannot be recognized, or that no command file can be found on the inserted USB
device.
1
The flashing behavior is an on/off cycle once every 1.6 seconds, approximately.
2
The flashing behavior is an on/off cycle once every 0.8 seconds, approximately.
Switch LEDs
State
Meaning
Содержание J9146A - ProCurve Switch 2910al-24G-PoE
