HP J3128A AdvanceStack 10Base-T Hub-8E, Руководство пользователя

Страница: 134 / 194

6-77
Configuration Reference
Config
uration Refe
ren
c
e
Figure 6-32. The Port Security Screen
Disabling Security from Ports in the Console
You can disable security from ports. To disable security on a port, perform
the following steps:
1. Type Y at the prompt
Disable Security from the Ports
and press
[Enter]
. The screen displays the following prompt:
Apply the disabled security to which ports
2. Type the port number for which you want security disabled and press
[Enter]
. You have several different methods for entering port numbers.
• For a single port, simply type the port number.
• For consecutive ports, you can type a range value in, using a dash.
For example 3-7 indicates you want to disable security for ports 3, 4,
5, 6, and 7.
• For a mix of consecutive and non-consecutive ports, you can use both
dashes and commas. For example, 3-7, 12, 19 indicates you want to
disable security for ports 3, 4, 5, 6, 7, 12, and 19.
After you have typed the port number(s), press
[Enter]
. The screen displays the
following prompt:
Continue with security disable
Ports with assigned
Address Selection
Method allow only
devices with the MAC
Address shown in the
Authorized Address
column to connect.
Agent.bk : AGTCH6.FM5 Page 77 Thursday, February 19, 1998 2:13 PM