QuickSpecs
HPE Integrity Superdome X
Standard Features
Page 9
USB (2 port) serial (DB9) and VGA (DB15). This is how a crash cart or a direct-attached USB DVD is connected for debugging
the system.
HPE Superdome X is supported in the HPE 600mm 42U wide Intelligent Series rack with a standard rack door.
Each BL920s blade is populated with one XNC2 Agent chip, two processor modules, and eight Intel Scalable Memory Buffer chips.
Detailed partitioning rules are included in the configuration rules for each system. However, general rules are as follows:
1.
Load the largest partitions first, and in accordance with the supported nPAR configurations as documented herein.
2.
Odd/even slot loading for BL920s blades in the same partition is required by nPAR sizing rules. For instance, a four blade
partition must have blades loaded in slots 1/3/5/7 or 2/4/6/8 (not slots 1/2/3/4 as in legacy Superdome).
3.
A BL920s blade must be in slot 1 of the enclosure.
A BL920s blade or filler blade (HPE CAMnet Completer Module, CCM) must be in slot 2 or 3 of the compute enclosure. A CCM is
needed if there is only a single blade to provide redundant manageability fabric from the GPSMs to the OAs. A CCM is automatically
included in the enclosure, in slot 2, when there is only one compute blade.
