HP HPE VAN SDN Controller 2.7 Скачать руководство пользователя страница 83 | Manualshive

Страница: 83 / 231

HP HPE VAN SDN Controller 2.7 Скачать руководство пользователя страница 83

Table 4 Controller settings to support hybrid mode (continued)

Comments

Key

Controller Configurations Component

To support ARP-based
host discovery, change

arp.age

com.hp.sdn.disco.of.node.impl.OfArpDiscoveryComponent

this setting in the
controller to be greater
than or equal to the “ip
arp-age” setting on
controlled switches.

To support DHCP-based
host discovery, change

dhcp.age

com.hp.sdn.disco.of.node.impl.OfDhcpDiscoveryComponent

this setting in the
controller to be greater
than or equal to the
timeout value of the
DHCP server(s) on your
network.

To view or reconfigure any of the above controller configuration components:

1.

In the controller UI, select

Configurations

.

a.

Select the

Basic

tab to view or modify the following components:

•

com.hp.sdn.ctl.of.impl.ControllerManager

•

com.hp.sdn.disco.of.node.impl.OfArpDiscoveryComponent

•

com.hp.sdn.disco.of.node.impl.OfDhcpDiscoveryComponent

b.

Select the Advanced tab to view or modify the following component:

•

com.hp.sdn.disco.of.link.impl.OpenflowLinkDiscoveryComponent

2.

Click the

Modify

button. In the Modify Configuration dialog box you can view the current

setting for each key for the component and make changes.

3.

Click

Apply

to save the changes.

For more information on using the Configurations screen, see

“Configurations screen details”

Limitations

For information on limitations in OpenFlow table support, see the

HPE VAN SDN Controller and

Applications Support Matrix

.

OpenFlow 1.0 is the default version of OpenFlow for Hewlett Packard Enterprise ProVision
switches. OpenFlow does not allow the controller to optimize flow location in hardware tables.
For concerns about line-rate data plane performance, configure all managed switches to use
OpenFlow 1.3. Failure to properly configure the switch in this way may cause packet loss or other
problems associated with high switch CPU utilization.

Uncontrolled switches in an OpenFlow Hybrid network are not visible to or controlled by the HPE
VAN SDN Controller. Uncontrolled switches are either controlled by another controller (outside
the team) or not controlled at all (traditional networking). Traffic by such switches is independently
managed.

The HPE VAN SDN Controller Path Diagnostic Tool is useful only when hybrid mode is disabled.
When hybrid mode is enabled, the controller does not monitor or direct all flows in the network.
As a result, the path diagnostic tool (PathDiagnosticManager) does not have visibility into all
flows on the network, and should not be used.

Coordinating controller hybrid mode and OpenFlow switch settings

83

«
...
81
82
83
84
85
...
»

Содержание HPE VAN SDN Controller 2.7








































































































































































































































Отзывы:

Нет отзывов