HP HPE VAN SDN Controller 2.7, Руководство администратора, Страница: 66 / 231

Using Search
You can search the topology based on various criteria by using one of the following methods.
•
Search using View → Search . Or press the F shortcut key to open the Search dialog box.
This search is based on any ONE of the following criteria: Switch IP, Datapath ID, Host IP
or Host MAC.
•
Type the search criteria in Search (regex) box and click Search . This search is across ALL
the text including: Switch IP address, Datapath ID, System name, End host IP address and
MAC address.
Search using the Search menu:
1. Select View → Search . Or press the F shortcut key to open the Search dialog box.
2. The Search dialog box is displayed.
When the Search dialog box is opened, if one or more nodes are collapsed or highlight path
is enabled, all will be cleared during the search. After the search dialog is closed, the state
of collapse and highlighting will be returned.
3. From the drop down list, select one of the search criteria: Switch IP, Datapath ID, Host IP,
Host MAC. Then enter the search value.
4. Click Search . If any match is found the border changes to green. If no match is found the
border changes to red.
To close the dialog box click Close or click Reset to clear the search value and reset the
topology view.
Search using Search (regex):
66 Using the SDN controller UI