HP flexnetwork 5510 hi series, Руководство по установке

Страница: 69 / 82

64
Table 27 100/1000Base-X SFP port LED description
MODE LED
status SFP port LED
status
Description
Steady green (rate
mode)
Steady green
A link is present on the port and The port is operating at 1000
Mbps. The port LED fast flashes when the port is sending or
receiving data.
Flashing green The port is sending or receiving data at 1000 Mbps.
Steady yellow
A link is present on the port and the port is operating at 100
Mbps. The port LED fast flashes when the port is sending or
receiving data.
Flashing yellow The port is sending or receiving data at 100 Mbps.
Flashing yellow (3
Hz)
POST has failed on the port.
Off
No link is present on the port.
The MODE LED operates in IRF mode.
Flashing yellow
(IRF mode)
Off
The port status LEDs on the switch work in conjunction to
indicate the IRF member ID of the switch. For example, if the
LEDs for ports 1 to 5 are steady green and the other port LEDs
are off, the IRF member ID of the switch is 5.
SFP+ port LED
Table 28 SFP+ port LED description
SFP+ port LED
status
Description
Steady green A link is present on the port and the port is operating at 10 Gbps.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow A link is present on the port and the port is operating at 1 Gbps.
Flashing yellow The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz) POST has failed on the port.
Off
•
No link is present on the port.
•
The MODE LED operates in IRF mode.
•
The MODE LED operates in PoE mode (for PoE switches only.)
Management Ethernet port LEDs
The switch provides an ACT/LINK LED to indicate the operating state of the management Ethernet
port.
Table 29 Management Ethernet port LED description
Management Ethernet
port LED (ACT/LINK)
status
Description
Green The port is up.