67
For compatibility between the switches and cards and power supplies, see "
Weights and dimensions
Table 11
Chassis weights and dimensions
Model Weight Height
Width
Depth
12910 AC
< 85.03 kg (187.46
lb)
930 mm (36.61 in),
or 21 RU
440 mm (17.32
in)
830 mm (32.68
in)
Rack height is measured in RUs. One RU is 44.45 mm (1.75 in).
To meet the clearance requirement, HP recommends that you use a rack with a depth of 1.2 m (3.94 ft).
You must reserve at least 155 mm (6.10 in) of clearance between the front rack post and the front door.
The total depth of the switch is 1080 mm (42.52 in) by calculating together the depth of chassis, the cable
management bracket, and the power cable bracket, which are 830 mm (32.68 in), 150 mm (5.91 in),
and 100 mm (3.94 in), respectively.
The weight listed in
are for switch chassis, including mounting brackets and cable management
brackets but excluding cards and power supplies. When the switch is installed with all accessories (cards,
power supplies, and transceiver modules), its maximum weight is 200 kg (440.92 lb). Make sure the
slide rails can fully support this weight. HP recommends that you order the HP X421 A-Series Chassis
Universal 4-Post Rack Mounting Kit (JC665A), which supports a weight up to 300 kg (661.38 lb).
Table 12
Card weights and dimensions
Card model
Weight Height
Width
Depth
LSX1SUP10A1
2.53 kg (5.58 lb)
45.0 mm (1.77 in) 432.0 mm (17.01 in) 308.5 mm (12.15 in)
LSX1TGS48EA1
5.84 kg (12.87 lb) 39.8 mm (1.57 in) 399.2 mm (15.72 in) 512.1 mm (20.16 in)
LSX1QGS16EA1 6.06 kg (13.36 lb) 39.8 mm (1.57 in) 399.2 mm (15.72 in) 512.1 mm (20.16 in)
LSX1FAB10B1
3.09 kg (6.81 lb)
39.8 mm (1.57 in) 432.0 mm (17.01 in) 308.5 mm (12.15 in)
NOTE:
Card dimensions are expressed as follows:
•
H
—Height of the front panel of the card.
•
W
—Width of the front panel of the card.
•
D
—Depth from the front panel of the card to the connector.
Table 13
Power supply weights and dimensions
Model Weight Height
Width
Depth
HP 12500 2000W
AC Power Supply
2.2 kg (4.85 lb)
41.4 mm (1.63 in) 101.6 mm (4 in) 351.8 mm (13.85 in)
Содержание FlexFabric 12900 series
Страница 13: ...7 Figure 2 Clearances required for a 12910 AC chassis ...
Страница 108: ...102 Figure 73 Example of a device label ...