HP FlexFabric 12900 series, Руководство по установке

Страница: 76 / 124

70
Appendix B FRUs and compatibility matrixes
This appendix describes the field replaceable units (FRUs) available for the HP FlexFabric 12900 switch
series and their compatibility.
All the FRUs in this appendix are hot swappable.
MPUs
MPU is the core of the control management plane for the switch. The 12910 AC switch supports the MPU
LSX1SUP10A1. MPUs are ordered separately.
An HP FlexFabric 12900 switch requires one MPU for proper operation. You can also install two MPUs
for redundancy.
Table 19 describes the MPU specifications, and Table 20 shows the MPU product code and model
matrix.
Table 19 LSX1SUP10A1 specifications
Item Description
Interfaces
•
One console port
•
One 10/100/1000BASE-T interface for management and upgrade
•
One USB port
Interface transmission
rate
•
Console port —No greater than 115200 bps and defaults to 9600 bps
•
10/100/1000BASE-T interface —10/100/1000 Mbps, half/full duplex
Cables and max
transmission distance
•
Console port —15 m (49.21 ft) over common asynchronous serial interface cable
•
10/100/1000BASE-T interface —100 m (328.08 ft) over category-5 twisted pairs
Table 20 MPU product code and model matrix
MPU model Product code HP description
LSX1SUP10A1 JG621A HP FlexFabric 12910 Main Processing Unit
LPUs
The LPUs in Table 21 apply to the HP FlexFabric 12900 switches. For more information about the
transceiver modules that each LPU supports, see " Transceiver modules ."