HP FlexFabric 12900 series, Руководство по установке

Страница: 77 / 124

71
Table 21 LPU specifications
LPU model Description Connector
Number
of
interfaces
Interface
transmissi
on rate
Available transceiver
modules
LSX1TGS48EA1
48-port 10-Gigabit
SFP+ optical
Ethernet interface
card
LC 48 10/1 Gbps
•
10-Gigabit SFP+
module
•
10-Gigabit SFP+
cable
•
Gigabit SFP module
LSX1QGS16EA
1
16-port 40-Gigabit
QSFP+ optical
Ethernet interface
card
MPO 16 40 Gbps
•
QSFP+ module
•
QSFP+ cable
•
QSFP+ to SFP+
cable
Table 22 LPU product code and model matrix
LPU model Product code HP description
LSX1TGS48EA1 JG624A HP FlexFabric 12900 48-port 10GbE SFP+ EA Module
LSX1QGS16EA1 JG625A HP FlexFabric 12900 16-port 40GbE QSFP+ EA Module
Switching fabric modules
You can install up to six switching fabric modules in one 12910 AC switch chassis.
Table 23 Switching fabric module ordering guide
Chassis model Available switching fabric module model
12910 AC LSX1FAB10B1
Table 24 Switching fabric product code and model matrix
Switching fabric
model
Product
code
HP Description
LSX1FAB10B1 JG623A HP FlexFabric 12910 3.84Tbps Type B Fabric Module
Power supplies
The 12910 AC switch supports the HP 12500 2000W AC Power Supply (JF429A). An HP 12500
2000W AC Power Supply is an AC-input, DC-output power supply that provides a maximum DC output
power of 2000 W.
The HP FlexFabric 12900 switches use N + N (dual-line power supply) or N + 1 (one-line power supply)
power redundancy. You can install appropriate number of power supplies according to the power supply
mode and system consumption. Make sure the total maximum output power of the ordered power
supplies is greater than the system power consumption. HP recommends that you reserve 20% of the
maximum output power.