manualshive.com logo in svg

HP ENVY, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ENVY Скачать руководство пользователя страница 68

LED board

Description

Spare part number

LED board (includes cable)

812696-001

Before removing the LED board, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 35

).

5.

Remove the battery (see 

Battery on page 54

).

6.

Remove the hard drive (see 

Hard drive on page 55

).

7.

Remove the right speaker (

Speakers (front) on page 57

).

Remove the LED board:

1.

Disconnect the LED board cable (1) from the system board.

2.

Pull the ribbon cable up to disengage the adhesive securing it to the computer (2).

3.

Remove the two Phillips PM2.5×3.0 screws (3) that secure the LED board to the computer.

4.

Remove the LED board (4) from the computer while routing the LED board cable under the keyboard 
cable.

Reverse this procedure to install the LED board.

60

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание ENVY
































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды