HP ENVY m6 Скачать руководство пользователя страница 91

Страница: 91 / 104

Downloading a BIOS update

CAUTION:

To reduce the risk of damage to the computer or an unsuccessful installation, download

and install a BIOS update only when the computer is connected to reliable external power using the AC

adapter. Do not download or install a BIOS update while the computer is running on battery power,

docked in an optional docking device, or connected to an optional power source. During the

download and installation, follow these instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

From the Start screen, type

hp support assistant

, and then select the

HP Support

Assistant

app.

Click

Updates and tune-ups

, and then click

Check for HP updates now

Follow the on-screen instructions.

At the download area, follow these steps

Identify the most recent BIOS update and compare it to the BIOS version currently installed on

your computer. If the update is more recent than your BIOS, make a note of the date, name,

or other identifier. You may need this information to locate the update later, after it has been

downloaded to your hard drive.

Follow the on-screen instructions to download your selection to the hard drive.

NOTE:

If the update is more recent than your BIOS, make a note of the path to the location on

your hard drive where the BIOS update is downloaded. You will need to access this path when

you are ready to install the update.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the

download is complete. If no instructions are revealed, follow these steps:

From the Start screen, type

file

, and then select

File Explorer

Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

Double-click the file that has an .exe extension (for example,

filename.exe

The BIOS installation begins.

5. Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Updating the BIOS

Содержание ENVY m6









































































































Результаты поиска

Содержание ENVY m6

Отзывы:

Похожие инструкции для ENVY m6

Бренды по названию

Популярные бренды

HP ENVY m6, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ENVY m6

Отзывы:

Похожие инструкции для ENVY m6

Бренды по названию

Популярные бренды