Base enclosure
Description
Spare part number
For use only on computer models equipped with an AMD processor
760035-001
For use only on computer models equipped with an Intel processor
774152-001
Before removing the base enclosure, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery on page 37
).
5.
Remove the solid-state drive (see
WLAN module on page 38
).
6.
Remove the hard drive (see
Hard drive on page 41
).
Remove the base enclosure:
1.
Remove the front rubber feet
(1)
.
2.
Remove the screw cover
(2)
.
The front rubber feet and the screw cover are included in the Rubber Kit, spare part number
720559-001.
48
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Содержание ENVY m6
