When this setting is enabled, a login dialog box opens when a user accesses the iLO configuration options in the UEFI
System Utilities.
When the FIPS and CNSA security states are enabled, iLO displays a user credential prompt even if this option is
disabled.
This option is called
Require user login and configuration privilege for iLO 5 Configuration in the UEFI System
Utilities.
Show iLO IP during POST
Enables the display of the iLO network IP address during host server POST.
When this setting is enabled (default), the iLO IP address is displayed during POST.
When this setting is disabled, the iLO IP address is not displayed during POST.
Virtual Serial Port Log
Enables or disables logging of the Virtual Serial Port.
When this setting is enabled, Virtual Serial Port activity is logged to a 150-page circular buffer in the iLO memory.
Use the CLI command
vsp log
to view the logged information. The Virtual Serial Port buffer size is 128 KB.
When this setting is disabled (default), Virtual Serial Port activity is not logged.
Anonymous Data
Controls the XML object iLO provides in response to an anonymous request for basic system information. When this
setting is enabled (default), other software is allowed to discover and identify an iLO system on the network. To view
the XML response that iLO provides, click
View XML.
When this option is disabled, iLO responds to requests with an empty XML object.
When this option is enabled and the iLO health status is
Degraded, the iLO health status and a description of the
issue are displayed on the login page. The iLO health status is based on the combined results of the iLO diagnostic
self-tests. Self-test failures that could compromise security are not displayed in the description.
Serial Command Line Interface Status
Enables you to change the login model of the CLI feature through the serial port. The following settings are valid:
•
Enabled-Authentication Required (default)—Enables access to the SMASH CLP command line from a terminal
connected to the host serial port. Valid iLO user credentials are required.
•
Enabled-No Authentication—Enables access to the SMASH CLP command line from a terminal connected to the
host serial port. iLO user credentials are not required.
•
Disabled—Disables access to the SMASH CLP command line from the host serial port. Use this option if you are
planning to use physical serial devices.
Serial Command Line Interface Speed
Enables you to change the speed of the serial port for the CLI feature.
The following speeds (in bits per second) are valid:
•
9600 (default)
For Synergy compute modules only: Ensure that this value is set to 9600. If you use another value, you cannot
access the Serial Command Line Interface from the Synergy Console and Composer CLI.
•
19200
•
38400—The iLO configuration options in the UEFI System Utilities do not support this value.
Set up HPE iLO on the HPE ProLiant e910t Server Blade
32
