manualshive.com logo in svg

HP EliteOne 800 G3, Руководство по обслуживанию и ремонту

Поделиться
Скачать
HP EliteOne 800 G3 Скачать руководство пользователя страница 88

Poor performance.

Cause

Solution

2.

Add more memory.

3.

Some applications run in the background and can be closed 
by right-clicking on their corresponding icons in the task 
tray. To prevent these applications from launching at 
startup:

In Windows 7:

a.

Go to Start > All Programs > Accessories > Run

b.

Type 

msconfig

, and then press 

Enter

.

c.

On the Startup tab of the System Configuration Utility, 
clear applications that you do not want to launch 
automatically, and the click OK.

In Windows 10:

a.

Type 

msconfig

 in the taskbar search box, and then 

select msconfig.

b.

On the Startup tab of the System Configuration Utility, 
click Open Task Manager.

c.

Select applications that you do not want to launch 
automatically, and the click Disable.

Some software applications, especially games, are stressful on 
the graphics subsystem.

1.

Lower the display resolution for the current application or 
consult the documentation that came with the application 
for suggestions on how to improve performance by 
adjusting parameters in the application.

2.

Add more memory.

3.

Upgrade the graphics solution.

Cause unknown.

Restart the computer.

Computer powered off automatically and the Power LED flashes red four times and then white two times.

Cause

Solution

Processor thermal protection activated:

A fan may be blocked or not turning.

OR

The heat sink is not properly attached to the processor.

1.

Ensure that the computer air vents are not blocked and the 
processor cooling fan is running.

2.

Open the access panel, press the power button, and see if 
the processor fan (or other system fan) spins. If the fan does 
not spin, make sure the fan cable is plugged onto the system 
board header.

3.

If fan a plugged in and not spinning, replace it.

System does not power on and the LEDs on the front of the computer are not flashing.

Cause

Solution

System unable to power on.

Press and hold the power button for less than 4 seconds. If the 
hard drive LED turns white, then:

80

Chapter 7   Troubleshooting without diagnostics

Содержание EliteOne 800 G3














































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды