HP EliteOne 800 G3 Скачать руководство пользователя | Manualshive

Страница: 115 / 141

background image

Creating recovery media and backups

Recovery after a system failure is only as good as your most recent backup.

1.

After you successfully set up the computer, create HP Recovery media. This step creates a Windows 7
operating system DVD and a Driver Recovery DVD. The Windows DVD can be used to reinstall the original
operating system in cases where the hard drive is corrupted or has been replaced. The Driver Recovery
DVD installs specific drivers and applications. See

Creating recovery media with HP Recovery Disc

Creator on page 107

2.

Use Windows Backup and Recovery tools to perform the following:

●

Back up individual files and folders

●

Back up your entire hard drive (select products only)

●

Create system repair discs (select products only) with the installed optical drive (select products
only) or an optional external optical drive

●

Create system restore points

NOTE:

This guide describes an overview of backing up, restoring, and recovering options. For more details

about the tools provided, see Help and Support. To access Help and Support, select Start, and then select
Help and Support.

NOTE:

HP recommends that you print the recovery procedures and save them for later use, in case of

system instability.

In case of system failure, you can use the backup files to restore the contents of your computer. See

up your information on page 108

.

Guidelines

●

When creating recovery media or backing up to discs, use any of the following types of discs (purchased
separately): DVD+R, DVD+R DL, DVD-R, DVD-R DL, or DVD±RW. The discs you use will depend on the type
of optical drive you are using.

●

Be sure that the computer is connected to AC power before you start the recovery media creation
process or the backup process.

Creating recovery media with HP Recovery Disc Creator

HP Recovery Disc Creator is a software program that offers an alternative way to create recovery media. After
you successfully set up the computer, you can create recovery media using HP Recovery Disc Creator. This
recovery media allows you to reinstall your original operating system as well as select drivers and
applications if the hard drive becomes corrupted. HP Recovery Disc Creator can create two kinds of recovery
DVDs:

●

Windows 7 operating system DVD—Installs the operating system without additional drivers or
applications.

●

Driver Recovery DVD—Installs specific drivers and applications only, in the same way that the HP
Software Setup utility installs drivers and applications.

Creating recovery media

NOTE:

The Windows 7 operating system DVD can be created only once. Thereafter, the option to create that

media will not be available after you create a Windows DVD.

To create the Windows DVD:

Backing up, restoring, and recovering in Windows 7 107

«
...
113
114
115
116
117
...
»

Содержание EliteOne 800 G3














































































































































Отзывы:

Нет отзывов

Похожие инструкции для EliteOne 800 G3

PC 300GL Type 6267

Бренд: IBM Страницы: 58

Бренд: Hatteland Страницы: 44

Бренд: Texim Europe Страницы: 5

Бренд: IBM Страницы: 75

IntelliStation E Pro Type 6226

Бренд: IBM Страницы: 138

NUC 11 Performance

Бренд: Intel Страницы: 20

Бренд: WAGO Страницы: 52

7012 300 Series

Бренд: IBM Страницы: 148

Kontron KWS 3000-CML

Бренд: S&T Страницы: 58

Бренд: Dell Страницы: 2

Бренд: Acnodes Страницы: 2

Бренд: Vizio Страницы: 36

Бренд: HP Страницы: 1

Pavilion 400 - Desktop PC

Бренд: HP Страницы: 2

Pavilion 400 - Desktop PC

Бренд: HP Страницы: 2

Бренд: HP Страницы: 6

Бренд: HP Страницы: 1

Бренд: HP Страницы: 1

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды