HP EliteOne 800 G3 Скачать руководство пользователя

Страница: 71 / 141

Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down) keys
to select the option you want, then press

Enter

. To return to the Computer Setup Utilities menu, press

Esc

To apply and save changes, select Main > Save Changes and Exit.

●

If you have made changes that you do not want applied, select Ignore Changes and Exit.

●

To restore settings from the Advanced and Main menus to original values, select Apply Factory
Defaults and Exit.

●

To restore settings from the Advanced and Main menus to those previously saved by Save Custom
Defaults, select Apply Custom Defaults and Exit. If no custom defaults have been saved, then
factory defaults are used.

NOTE:

Settings in the Security menu are not modified by Apply Defaults. Those values are reset by

Restore Security Settings to Factory Defaults at the bottom of the Security menu.

NOTE:

Not all settings shown in the following sections are available for all models

CAUTION:

Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes

because the settings could become corrupted. It is safe to turn off the computer only after exiting the F10
Setup screen.

Computer Setup (F10) Utilities

Содержание EliteOne 800 G3














































































































































Результаты поиска

Содержание EliteOne 800 G3

Отзывы:

Похожие инструкции для EliteOne 800 G3

Бренды по названию

Популярные бренды

HP EliteOne 800 G3, Руководство по обслуживанию и ремонту

Результаты поиска

Содержание EliteOne 800 G3

Отзывы:

Похожие инструкции для EliteOne 800 G3

Бренды по названию

Популярные бренды