manualshive.com logo in svg

HP EliteBook Revolve 810 G2 Tablet, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP EliteBook Revolve 810 G2 Tablet Скачать руководство пользователя страница 31

Spare part number

Description

753720-001

11.6-in, AntiGlare (1366×768), HD, UWVA display assembly (includes display hinge,
microphones, webcamera, and Windows button)

753721-001

Base enclosure (includes battery release latch, NFC board antenna cable, power connector cover,
and RJ-45 jack cover)

753723-001

System board equipped with anIntel Dual Core i3-4010U 1.7-GHz processor, 1600-MHz front-side
bus (FSB), 3 MB L3 cache, 15 W and the standard operating system (includes processor and
replacement thermal material)

753723-501

System board equipped with anIntel Dual Core i3-4010U 1.7-GHz processor, 1600-MHz front-side
bus (FSB), 3 MB L3 cache, 15 W and the Windows 8.1.1 Standard operating system (includes
processor and replacement thermal material)

753723-601

System board equipped with anIntel Dual Core i3-4010U 1.7-GHz processor, 1600-MHz front-side
bus (FSB), 3 MB L3 cache, 15 W and the Windows 8.1.1 Professional operating system (includes
processor and replacement thermal material) 

753724-001

System board equipped with an Intel Dual Core i5-4200U 1.6-GHz processor (turbo up to 2.6-
GHz), 1600-MHz FSB, 3- MB L3 cache, 15 W and the standard operating system (includes
processor and replacement thermal material)

753724-501

System board equipped with an Intel Dual Core i5-4200U 1.6-GHz processor (turbo up to 2.6-
GHz), 1600-MHz FSB, 3- MB L3 cache, 15 W and the Windows 8.1.1 Standard operating system
(includes processor and replacement thermal material)

753724-601

System board equipped with an Intel Dual Core i5-4200U 1.6-GHz processor (turbo up to 2.6-
GHz), 1600-MHz FSB, 3- MB L3 cache, 15 W and the Windows 8.1 Professional operating system
(includes processor and replacement thermal material)

753725-001

System board equipped with an Intel Dual Core i5-4300U 1.9-GHz processor (turbo up to 2.90-
GHz), 1600-MHz FSB, 3-MB L3 cache, 15 W, and the Standard operating system (includes
processor and replacement thermal material)

753725-501

System board equipped with an Intel Dual Core i5-4300U 1.9-GHz processor (turbo up to 2.90-
GHz), 1600-MHz FSB, 3-MB L3 cache, 15 W, and the Windows 8.1 Standard operating system
(includes processor and replacement thermal material)

753725-601

System board equipped with an Intel Dual Core i5-4300U 1.9-GHz processor (turbo up to 2.90-
GHz), 1600-MHz FSB, 3-MB L3 cache, 15 W, and the Windows 8.1 Professional operating system
(includes processor and replacement thermal material)

753726-001

System board equipped with anIntel Dual Core iIntel Dual Core i7-4600U 2.1-GHz processor (turbo
up to 3.3-GHz), 1600-MHz FSB, 4- MB L3 cache, 15 W and the Standard operating system
(includes processor and replacement thermal material)

753726-501

System board equipped with anIntel Dual Core iIntel Dual Core i7-4600U 2.1-GHz processor (turbo
up to 3.3-GHz), 1600-MHz FSB, 4- MB L3 cache, 15 W and the Windows 8.1 Standard operating
system (includes processor and replacement thermal material)

753726-601

System board equipped with anIntel Dual Core iIntel Dual Core i7-4600U 2.1-GHz processor (turbo
up to 3.3-GHz), 1600-MHz FSB, 4- MB L3 cache, 15 W and the Windows 8.1 Professional
operating system (includes processor and replacement thermal material)

753728-001

128-GB solid-state drive

753729-001

256-GB solid-state drive

753730-001

180-GB solid-state drive

753731-001

Screw Kit

Sequential part number listing

21

Содержание EliteBook Revolve 810 G2 Tablet

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды