HP EliteBook Folio 1040 G2 Скачать руководство пользователя страница 99 | Manualshive

Страница: 99 / 127

HP EliteBook Folio 1040 G2 Скачать руководство пользователя страница 99

wwcontact_us.html

. You can also order the DVD by calling support. For contact information, see the

Worldwide Telephone Numbers booklet included with the computer.

CAUTION:

Using a Windows 7 operating system DVD completely erases hard drive contents and reformats

the hard drive. All files that you have created and any software that you have installed on the computer are
permanently removed. When reformatting is complete, the recovery process helps you restore the operating
system, as well as drivers, software, and utilities.

To initiate recovery using a Windows 7 operating system DVD:

NOTE:

This process takes several minutes.

1.

If possible, back up all personal files.

2.

Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before
the Windows operating system loads.

3.

When prompted, press any keyboard key.

4.

Follow the on-screen instructions.

5.

Click Next.

6.

Select Repair your computer.

7.

Follow the on-screen instructions.

After the repair is completed:

1.

Eject the Windows 7 operating system DVD and then insert the Driver Recovery DVD.

2.

Install the Hardware Enabling Drivers first, and then install Recommended Applications.

Performing a system recovery

89

«
...
97
98
99
100
101
...
»

Содержание EliteBook Folio 1040 G2
































































































































Отзывы:

Нет отзывов