manualshive.com logo in svg

HP EliteBook Folio 1040 G2, Руководство по техническому обслуживанию и ремонту, Страница: 73 / 127

Поделиться
Скачать
HP EliteBook Folio 1040 G2 Скачать руководство пользователя страница 73

SIM slot

Description

Spare part number

Plastics Kit

739575-005

The Plastics Kit includes both the SIM slot insert for use in models with WWAN and the SIM slot cover for use 
in models without WWAN.

Service technicians must remove the system board to remove the SIM slot cover.

SIM slot insert (WWAN models)

The SIM slot insert, used on WWAN models, matches the size of the SIM card and is customer removable.

To insert and remove the SIM slot insert:

1.

Insert with the arrow on insert visible.

2.

To remove the insert, use the standard with push-pull movement.

SIM slot cover (non-WWAN models)

The SIM slot cover, used on models without WWAN, is shorter than a SIM card, notched, and is not customer 
removable.

To insert and remove the SIM slot cover:

1.

Insert with the arrow on insert visible.

Component replacement procedures

63

Содержание EliteBook Folio 1040 G2
































































































































Отзывы:

Нет отзывов