manualshive.com logo in svg

HP EliteBook Folio 1040 G2, Руководство по техническому обслуживанию и ремонту, Страница: 62 / 127

Поделиться
Скачать
HP EliteBook Folio 1040 G2 Скачать руководство пользователя страница 62

Smart card reader

Description

Spare part number

Smart card reader (includes cable)

739566-001

Before removing the smart card reader, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Bottom cover (see 

Bottom cover on page 31

)

5.

Remove the battery (see 

Battery on page 36

).

Remove the smart card reader:

1.

Lift the system board connector (1), and then disconnect the cable from the connector (2).

2.

Remove the three Phillips PM2.0×2.5 screws (3) that secure the reader to the computer.

52

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Содержание EliteBook Folio 1040 G2
































































































































Отзывы:

Нет отзывов