background image

Table 2-9

  Bottom component and its description

Component

Description

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool internal 

components and prevent overheating. It is normal for the internal fan to 
cycle on and off during routine operation.

Labels

The labels affixed to the computer provide information that you might need when you troubleshoot system 
problems or travel internationally with the computer. Labels can be in paper form or imprinted on the product.

IMPORTANT:

Check the following locations for the labels described in this section: the bottom of the 

computer, inside the battery bay, under the service door, on the back of the display, or on the bottom of a 
tablet kickstand.

Service label—Provides important information to identify your computer. When contacting support, you 
might be asked for the serial number, the product number, or the model number. Locate this 
information before you contact support.

Your service label information order may vary by country and might not include the wording "Model" due 
to the country regulation.

16

Chapter 2   Components

Содержание EliteBook 850 G7














































































































Отзывы: