Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
To start the Setup Utility, turn on or restart the computer, and then press
f10
while “Press <F10>
to enter setup” is displayed in the lower-left corner of the screen.
2.
Select
Exit > Load Setup Defaults
, and then press
enter
.
3.
When the Setup Confirmation is displayed, press
enter
to save your preferences.
4.
To set your preferences and exit the Setup Utility, press
f10
, and then follow the instructions on
the screen.
The Setup Utility default settings are set when you exit the Setup Utility and go into effect when the
computer restarts.
NOTE:
Your password, security, and language settings are not changed when you restore the factory
default settings.
Using the Setup Utility 107
Содержание Dv9575la - Pavilion - Core 2 Duo 1.8 GHz
