manualshive.com logo in svg

HP DL760 - ProLiant - 1 GB RAM, Руководство пользователя

Поделиться
Скачать
HP DL760 - ProLiant - 1 GB RAM Скачать руководство пользователя страница 101

Installing Hardware Options, Server Power Off 

5. 

Connect the expansion board I/O cable as appropriate. 

HP has designed a self-latching slot-keeper feature to accommodate 
full-length expansion boards. 

Be sure that the V-shaped slot-keeper tabs on the plastic expansion board guide 
are positioned over the forward end of the expansion board. Using the slot 
keepers is especially important when expansion boards are added or when the 
server is moved. 

 

Figure 4-9:  Full-length self-latching slot-keeper feature 

6. 

Close the I/O lid, and slide the server into the rack. 

7. 

Connect all power cords and power up the server (refer to Chapter 7). 

8. 

If necessary, run the ROM-Based Setup Utility, as described in Chapter 8. 

 

NOTE:

  For a list of supported I/O expansion boards, refer to the HP QuickSpecs for the 

ProLiant DL760 G2 servers at 

www.hp.com/products/servers/platforms

. 

 

NOTE:

  Each PCI-X bus is automatically configured to run in the most advanced mode 

(PCI-X or PCI) and the highest frequency supported by all expansion boards installed in the 
slots on the bus. 

4-12

 

HP ProLiant DL760 Generation 2 Server User Guide 

  

HP CONFIDENTIAL

 

Writer: Jennifer Hayward File Name: e-ch4 Installing Options-Power Off.doc 

Codename: Pioneer Part Number: 201264-002 Last Saved On: 6/17/03 9:32 AM 

Содержание DL760 - ProLiant - 1 GB RAM












































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды